The Linear Mixed Models Toolbox

Introduction

The Linear mixed Models Toolbox (lmt) is a stand-alone single executable software for for large scale linear mixed model analysis. It is the successor of DMU, the well-known and widely used software package for linear mixed model analysis developed and maintained by Per Madsen and Just Jensen.

Since the early days of software development in statistics and quantitative genetics time has moved on in terms of what programming languages are capable of and therefore DMU has been given a thorough overhaul.

One result of the overhaul is the new name, lmt, resulting from the difficulty to translate the acronym DMU into something which is generally meaningful throughout time. For those who prefer the acronym DMU, they may refer to lmt as DMU-next.

The second area of the overhaul is the parameter file interface. lmt now comes with an xml style parameter file which is supposed to allow for a much easier understanding by the user. Further using xml comes with support for automated commenting, un- commenting, indentation, code-folding and syntax highlighting by almost every editor, thus easing to follow the structure of the parameter file even if it spans several tens of lines of code.

The third area of the overhaul is the program structure. DMU was structured into several programs (DMU1, DMU4, DMU5, DMUAI, RJMC). In contrast, lmt is meant to provide the functionalities all those programs via a single parameter file and a single executable.

While lmt is finally meant to be a full scale successor of DMU, it does not yet provide all its functionalities in some areas, in others it already provides more. More specifi- cally, there no REML facilities available yet, but large scale linear mixed model solving provides Single-Step-T-BLUP facilities, uploading of genotypes and building of genomic relationship matrices on the fly etc etc.

Supported features

Supported operations

Currently lmt support the following operations on linear mixed models:

Solving for BLUP and BLUE solutions conditional on supplied variances for random and fixed factor, respectively;
Gibbs sampling of variance components in single pass and blocked mode;
MC-EM-REML estimation of variance components
Sampling elements of the inverse of the mixed model coefficient matrix

Supported factors and variables

lmt supports

fixed
random factors
classification variables
continuous co-variables, which can be nested. For continuous co-variables lmt support user-defined polynomials and hard coded Legendre polynomials up to order 6.
genetic group co-variables

All classification and co-variables can be associated to a fixed or random factor.

Supported variance structures

For random factor lmt supports variance structures of

structure $$\Gamma\otimes\Sigma$$, where $$\Sigma$$ is an dense symmetric positive definite matrix, and
$$\Theta_L(\Gamma\otimes I_{\Sigma})\Theta_L^{'}$$, where $$\Theta$$ is symmetric positive definite block-diagonal matrix of $$n$$ symmetric positive definite martices $$\Sigma_i, i=1,..,n$$, $$\Theta_L$$ is the lower Cholesky factor of $$\Theta$$ and $$I_{\Sigma}$$ is an identity matrix of dimension $$\Sigma_i$$.

When solving linear mixed models $$\Sigma$$ and $$\Gamma$$ are user determined constants, whereas when estimating variances $$\Gamma$$ is a user determined constant and $$\Sigma$$ is a function of the data.

Supported type for $$\Gamma$$ are

an identity matrix
an arbitrary positive definite diagonal matrix
a pedigree-based numerator relationship matrix $$A$$ which may contain meta-founders
a pedigree- and genotype-based relationship matrix $$H$$ which may contain meta-founders
a user-defined(u.d.) symmetric, positive definite matrix of which inverse is supplied
- as a sparse upper-triangular matrix stored in csr format
- as a dense matrix
a co-variance matrix of a selected auto-regressive process

Supported linear mixed model solvers

lmt supports

a direct solver requiring to explicitly build the linear mixed model equations left-hand-side coefficient matrix($$C$$)
an iteration-on-data pre-conditioned gradient solver which does not require $$C$$

Supported features related to genomic data

direct use of genomic marker data
building of genomic relationship matrices($$G$$) from supplied genomic data
uploading of a u.d. $$G$$
adjustment of $$G$$ to $$A_{gg}$$
solving Single-Step-G-BLUP models
sampling variances for Single-Step-G-BLUP models
solving Single-Step-T-BLUP models
solving Single-Step-SNP-BLUP models
all Single-Step models can be run from "bottom-up", that is the user supplies the genotypes and all necessary ingredients(e.g. $$G$$) are built on the fly.

Supported pedigree types

ordinary pedigrees
probabilistic pedigrees with an unlimited number of parent pairs per individual
genetic group pedigrees
meta-founders

Parameter file terminology part 1

The lmt parameter file must in written in “eXtensible Markeup Language” (xml). For under- standing the examples you may want to get a jump start in xml file structure first. Don’t be scared. Even without any previous knowledge you’ll be able to understand the xml structure used for lmt in less then half an hour. Please consult the Internet to find suitable introduction into xml. Bare in mind that the lmt parameter file is case sensitive, that is Hello is not the same as hello.

For writing and editing the lmt parameter file it is strongly advised to use an editor which supports syntax highlighting, bracket matching, code folding and code completion.

Unsupported xml features

Currently unsupported xml features are character entities and complete empty-element tags. Further, start tags and end tags must not occur in the same line of the parameter file.

Parameter file terminology

The lmt parameter file has only two major structural components: tags and key strings. The content of each tag can be one ore several other tags and one or several key strings.

Tag names

The tag name is the character string between the arrow brackets of a tag. For example, the tag name of <hello> is hello . Depending on the specific location and function of a tag the name can be hard-coded or user-defined(u.d.). U.d. tag names can be as short as possible. e.g. a single character, but must not contain any white space. While a tag name my contain any ascii character it is strongly recommended to use only alpha-numeric characters and underscores.

Key strings

Key strings have always the format keyword:variable . Keyword is a character string which is either hard coded or user defined. The spelling is therefore defined by the hardcoded value, or by the user, but must be abide by in any case. Variable refers to a

a single character string, or comma-separated list of strings which may be hardcoded or user-defined, or
a single or a comma-separated list of numeric values.

Parsing logic

lmt parse the parameter file starting at the compulsory <root> tag. Nested tags can be either automatic-compulsory, automatic-optional and nominated. Automatic-optional tags will be searched for by default and are evaluated if they are present. Their absence will not case an error message at parsing time. However, that does not mean that the information they should provide is not necessary later on and it's absence may cause an error stop. Automatic-compulsory tags will be search for by default and their absence will cause an error stop. Nominated tags are always compulsory but are only searched for if they have been nominated by a key string variable, where the key string variable becomes the tag name.

Depending on the host tag key strings can be optional or compulsory.

<root>
  <nest_1>
  </nest_1>
  <nest_2>
    <x>
    </x>
    others: y,z
    <y>
    </y>
    <z>
    </z>
  </nest_2>
</root>

In the above example nested tags <nest_1> and <nest_2> maybe optional or compulsory, but both are automatic, that is lmt will evaluate them only if the are present. Tag <x> , nested in tag <nest_2> , is automatic and may be optional or compulsory as well. However, tags <y> and <z> are nominated and therefore compulsory. The nomination is triggered by providing key string other: y,z where the variable y,z provides a comma-separated list of names of the nominated tags. That is, after evaluating key string others: y,z lmt will search for tags <y> and <z> , and their absence will cause an error stop.

Group of mutually exclusive information sources

For the sake of flexibility the user can supply the same information in several different ways to lmt. For instance, information can be embedded in a tag for provided via a file where the variable of key string variable contains the file name . In such a case, the key string and the tag form a Group of mutually exclusive information sources (GIS). The name already implies that lmt will accept only one source of information and if it finds more than one source will stop with an error message.

Escaping tag content formatting rules

As pointed out above are the only accept tag content, and key strings must comply with a formatting rule. However, it is sometimes desirable to supply other information in a tag where that information may not comply with the formatting rule. In order to do so the tag content can be globally escaped by adding an attribute to the tag. However, this implies that by providing an attribute the whole tag content is escaped, not just a single line.

lmt Linear mixed model terminology

Matrix notation, factors and sub-factors

Consider the multi-variate linear mixed model

$$ \left( \begin{array}{c} y_1 \\ y_2 \\ y_3 \end{array} \right) = \left( \begin{array}{ccc} X_1 & 0 & 0 \\ 0 & X_2 & 0 \\ 0 & 0 & X_3 \end{array} \right) \left( \begin{array}{c} b_1 \\ b_2 \\ b_3 \end{array} \right) + \left( \begin{array}{ccc} Z_1 & 0 & 0\\ 0 & Z_2 & 0\\ 0 & 0 & Z_3 \end{array} \right) \left( \begin{array}{c} u_1 \\ u_2 \\ u_3 \end{array} \right) + \left( \begin{array}{c} e_1 \\ e_2 \\ e_3 \end{array} \right) $$

where $$(y_1,y_2,y_3)'$$, $$(b_1,b_2,b_3)'$$, $$(u_1,u_2,u_3)'$$ and $$(e_1,e_2,e_3)'$$ are vectors of response variables, effects of fixed factors, effects of random factors and effects of residuals respectively, and matrices $$\left( \begin{array}{ccc} X_1 & 0 & 0 \\ 0 & X_2 & 0 \\ 0 & 0 & X_3 \end{array} \right)$$, and $$ \left( \begin{array}{ccc} Z_1 & 0 & 0\\ 0 & Z_2 & 0\\ 0 & 0 & Z_3 \end{array} \right) $$ are block-diagonal design matrices linking effects in the respective vectors to their related response variables. In usual mixed model terminology $$b_1$$, $$b_2$$ and $$b_3$$ are called fixed factors, and $$u_1$$, $$u_2$$ and $$u_3$$ are called random factors. Ignoring the residual the above model has in total 6 factors.

However, the model maybe rewritten in matrix formulation as

$$vec(Y)=Xvec(B)+Zvec(U)+vec(E)$$,

where $$vec$$ is the vectorization operator, $$Y=[y_1,y_2,y_3]$$, $$B=[b_1,b_2,b_3]$$, $$U=[u_1,u_2,u_3]$$ and $$E=[e_1,e_2,e_3]$$ are column matrices of response variables, the effects of the fixed and random factor, and the residuals, respectively, and $$X=\left( \begin{array}{ccc} X_1 & 0 & 0 \\ 0 & X_2 & 0 \\ 0 & 0 & X_3 \end{array} \right)$$, and $$Z= \left( \begin{array}{ccc} Z_1 & 0 & 0\\ 0 & Z_2 & 0\\ 0 & 0 & Z_3 \end{array} \right) $$. The distribution assumption for the random components in the model are $$vec(U^{'})\sim N((0,0,0)',\Gamma_u \otimes \Sigma_u)$$ and $$vec(E^{'})\sim N((0,0,0)',\Gamma_e \otimes \Sigma_e)$$. Note that the column and row dimensions of $$U$$ are determined by the column dimension of $$\Sigma_u$$ and $$\Gamma_u$$ respectively.

Slightly different to the above terminology, lmt refers to $$B$$ and $$U$$ as factors, and therefore the model has only two factors, whereas the columns in $$B$$ and $$U$$ are referred to as sub-factors.

Following the above matrix notation lmt will always invoke only one factor for all modelled fixed classification variables and only one factor for all modelled fixed continuous co-variables. Sub-factors are summarized into a single random factors if they share the same $$\Sigma$$ matrix. Thus, lmt will invoke as many random factors as there are different $$\Gamma \otimes \Sigma$$ constructs. That is, in lmt terminology the multi-variate model

$$ \left( \begin{array}{c} y_1 \\ y_2 \\ y_3 \end{array} \right) = \left( \begin{array}{ccc} X_1 & 0 & 0 \\ 0 & X_2 & 0 \\ 0 & 0 & X_3 \end{array} \right) \left( \begin{array}{c} b_1 \\ b_2 \\ b_3 \end{array} \right) + \left( \begin{array}{cccccc} Z_{d,1} & 0 & 0 & Z_{m,1} & 0 & 0\\ 0 & Z_{d,2} & 0 & 0 & Z_{m,2} & 0\\ 0 & 0 & Z_{d,3} & 0 & 0 & Z_{m,3}\\ \end{array} \right) \left( \begin{array}{c} u_{d,1} \\ u_{d,2} \\ u_{d,3} \\ u_{m,1} \\ u_{m,2} \\ u_{m,3} \end{array} \right) + \left( \begin{array}{ccc} W_1 & 0 & 0\\ 0 & W_2 & 0\\ 0 & 0 & W_3 \end{array} \right) \left( \begin{array}{c} v_1 \\ v_2 \\ v_3 \end{array} \right) + \left( \begin{array}{c} e_1 \\ e_2 \\ e_3 \end{array} \right) $$

with $$(u_{d,1},u_{d,2},u_{d,3},u_{m,1},u_{m,2},u_{m,3})'\sim N((0,0,0,0,0,0)',\Sigma_u \otimes \Gamma_u)$$ and $$(v_1,v_2,v_3)'\sim N((0,0,0)',\Sigma_v \otimes \Gamma_v)$$, rewritten as $$vec(Y)=Xvec(B)+Zvec(U)+Wvec(V)+vec(E)$$ will have only 3 factors, $$B$$, $$U$$ and $$V$$ with $$b_1,b_2,b_3$$, $$u_{d,1},u_{d,2},u_{d,3},u_{m,1},u_{m,2},u_{m,3}$$ and $$v_1,v_2,v_3$$ being subfactors of $$U$$ and $$V$$ respectively.

Model syntax

The syntax for communicating the model to lmt is effectively just write the model.

An example for a valid lmt model string would be y=mu*b+age(t(co(p(1,2))))*c+id*u(v(my_var(1))) .

The components of the model string are

the response variable y , which must be a column name in the data file
variables mu , age and id , which must be a column names in the data file
sub-factors b , c and u which are user-defined alpha-numeric character strings
relation operators = , * and +
a variable specifier (t(co(p(1,2)))) used to provide further information about variable age
a sub-factor specifier (v(my_var(1))) used to provide further information about sub-factor u

The rules for using relational operators are

= links the response variable to the model
* links a model variable to it's sub-factor, which together form a right hand side component
+ concatenates different right hand side components.

Specifiers

Variables and sub-factors maybe accompanied by a specifier. A specifier is a tree diagramm in Newick format with all nodes named, but leaf nodes can be unnamed, and where the root node name is the variable or sub-factor name. The specifier provides additional information about a variable or sub-factor. The lmt version of the above tree diagram differs in that

the parent nodes precede child nodes
child nodes within the same parent node are separated by semicolon
sibling nodes can be mutually exclusive, that is only one sibling node maybe allowed
leaf nodes maybe not named but contain additional, maybe comma-separated information
if a child node is marked as default, the child node and it's immediate parent node can be omitted
if a node is marked as optional it can be omitted. if an optional node is used it's compulsory child nodes must be included

Variable specifiers

Variable specifiers are used to communicate further information which may be that the variable

is continuous but real numbers
is continuous but integer numbers
is a genetic group regression matrix
undergoes a polynomial expansion
is associated to a nesting variable

etc.

The tree diagram for the variable specifier is

with the nested parentheses representation written as

variable(t(co(t(i;r);p(polynomial ids);n(variable));cl;gg(pedigree)))

Note that the above representation would not yield a valid specifier useable in an equation as the diagram contains sibling nodes which are mutually exclusive, thus allowing only one of the sibling node to occur in the specifier. That is valid specifiers would be

variable(t(cl))
variable(t(gg(pedigree)))
variable(t(co(t(i);p(polynomial id);n(variable))))
variable(t(co(t(i);p(polynomial id);n(variable))))

Since a default-determining leave node and it's immediate parent node can be omitted the following equality holds:

variable(t(cl))=variable

Sub-factor specifiers

Sub-factor specifiers are used to communicate further information which may be that the sub-factor

is a random sub-factor
to which variance it is related to
which diagonal element in the $$\Sigma$$ matrix of the variance it is related to

The tree diagram for the sub-factor specifier is

with the nested parentheses representation written as

sub-factor(v(variance name(diagonal position)))

According to the tree diagram the sub-factor specifier in the example model string in #Model syntax translates to

sub-factor name is u
the sub-factor has a variance
variance name is my_var
the diagonal position in $$\Sigma$$ is #1.

Variables as well as sub-factors maybe used across traits. That is a model

y1=mu*b1+id*u1(v(sigma(1))
y2=mu*b2+id*u2(v(sigma(2))

Disclaimer

lmt is under ongoing development and many of its features have been tested only a few times on a limited number of models and data sets. Thus, the users uses lmt completely on his/her own risk. This also applies to any decisions made based on the results provided by lmt.

Conditions of use

lmt can be used by the scientific community free of charge, but users must credit lmt in any publications. Commercial users must obtain the explicit approval of the author before using lmt and must credit lmt in any publication in scientific journals.

Feedback and support

lmt comes without any guaranteed support and the user is strongly advised to study the manual thoroughly. However, the author appreciates feedback about the program functionality, possible aborts (segmentation faults), usability of output and comprehensiveness of the manual.

The Linear Mixed Models Toolbox

Contents

Introduction

Supported features

Supported operations

Supported factors and variables

Supported variance structures

Supported linear mixed model solvers

Supported features related to genomic data

Supported pedigree types

Parameter file terminology part 1

Unsupported xml features

Parameter file terminology

Tag names

Key strings

Parsing logic

Group of mutually exclusive information sources

Escaping tag content formatting rules

lmt Linear mixed model terminology

Matrix notation, factors and sub-factors

Model syntax

Specifiers

Variable specifiers

Sub-factor specifiers

Disclaimer

Conditions of use

Feedback and support

Navigation menu

The Linear Mixed Models Toolbox

Introduction

Supported features

Supported operations

Supported factors and variables

Supported variance structures

Supported linear mixed model solvers

Supported features related to genomic data

Supported pedigree types

Parameter file terminology part 1

Unsupported xml features

Parameter file terminology

Tag names

Key strings

Parsing logic

Group of mutually exclusive information sources

Escaping tag content formatting rules

lmt Linear mixed model terminology

Matrix notation, factors and sub-factors

Model syntax

Specifiers

Variable specifiers

Sub-factor specifiers

Disclaimer

Conditions of use

Feedback and support

Navigation menu

Search