Examples
The examples provided in this section are meant to provide a practical examples about the lmt facilities and the parameter file syntax. It is assumed that the reader is familiar with section
Solving linear mixed model equations
Estimating a mean in a uni-variate model
Estimating a mean is equivalent to obtaining the generalized least square solution $$b=(X'R^{-1}X)^{-1}X'R^{-1}y$$ for model $$y=Xb+e$$, where $$y$$ is a vector of $$n$$ observations, $$X$$ is as single column matrix of $$1$$, $$b$$ is a fixed factor (mean), $$e$$ is the residual and $$y\sim N(Xb,R)$$ where $$R$$ is a $$n \times n$$ co-variance matrix.
From the above it follows that for task of solving for $$b$$ lmt needs following information:
the data the residual variance $$R$$ the model the solver
Assume we have a data file "data.csv" with content:
#y,mu 25.0,1 33.1,1 36.0,1 28.3,1
where the columns are comma-separated, the first row is commented out with “#” but contains the header, and all other rows contain data records. A valid lmt xml parameter file would look like:
<root>
<models>
<eqn attributes="strings">
y=mu*b
</eqn>
</models>
<data>
datafile: data.csv
missingthreshold: -50.0
</data>
<vars>
<res>
<sigma>
<matrix attributes="matrix">
5.0
</matrix>
</sigma>
</res>
</vars>
</root>Following the introduced parameterfile terminology tags , <vars> and <model> are automatic-compulsory. Since solve is the default job and we are using the default solver in default parameterization no further information about the job or solver is required.
The most important aspect is the model definition in tag <eqn> , nested inside tag <model> $$y=mu*b$$. The variable names used here are either defined by the data file header, or by the user. That is, $$y$$ and $$mu$$ are defined in the data file header, whereas $$b$$ is a user-defined factor name. Translated this means that the content of the data column named $$y$$ should be regressed on the content of the data column named $$mu$$ with the regression coefficient named $$b$$.
Since there are no further specifications supplied about $$y$$, $$mu$$ and $$b$$, it is assumed that $$y$$ is a continuous variable, $$mu$$ is a classification variable, and $$b$$ is fixed factor. The necessary variances are defined by the content of the automatic-compulsory tag <vars> . lmt requires one compulsory variance, the residual variance, which must be specified via tag <res> . Therefore tag res is automatic-compulsory.
The default lmt variance structure is $$\Gamma\otimes\Sigma$$, where $$\Gamma$$ and $$\Sigma$$ are specified inside tags <gamma> and <sigma> , respectively. However, only tag <sigma> is automatic-compulsory, whereas tag <gamma> is automatic-optional. A missing <gamma> tag implies that $$\Gamma = I$$. Note that for lmt $$\Sigma$$ is always a matrix, that is a scalar $$\sigma^2$$ is treated as a matrix $$1 \times 1$$ matrix.
For the above example, the variance specification inside <res> implies that $$\Gamma\otimes \Sigma \equiv I\otimes \Sigma$$. Since $$\Sigma$$ is a $$1\times 1$$ matrix with $$\Sigma[1,1]=\sigma_e^2$$, $$R$$ reduces to $$I\sigma_e^2$$.
Note tag <matrix> nested in tag <sigma> . The content of tag <matrix> does not comply with the formatting rules as pointed o ut above. That is 5.0 is not a valid key string. To let lmt know that the content of tag <matrix> should not be evaluated as a key string, with a subsequent error message, the tag must have attributes. In this example matrix attributes="matrix" escapes the content of tag <matrix> from the formatting rules.
Further, tag <matrix> is automatic-optional. This might be confusing because, as pointed out above, $$\Sigma$$ forms an indispensable part of $$\Gamma\otimes \Sigma$$. However, tag <matrix> belongs to a group of mutually exclusive information sources of which members are tag <matrix> and key string file: yourfilename . That is, $$\Sigma$$ maybe either embedded in the parameter file or supplied via an external file.
Note that the spelling of most tags used in the above parameter file is determined by lmt and must be abide by.
Estimating a fixed mean and a random genetic effect in a uni-variate model
Consider the linear model $$y=Xb+Zu+e$$ where all variables are those declared in #Estimating a mean, $$u$$ is vector of length $$m$$ of random direct genetic effects and $$Z$$ is a design matrix of dimension $$n \times m$$ linking genetic effects to their respective observations. Note that $$u\sim N(0,A\sigma_a^2)$$ where $$A$$ is the pedigree-derived relationship matrix and forms the $$\Gamma$$ part in $$\Gamma\otimes\Sigma$$. A possible data file for such mode may look like:
#y,mu,id 25.0,1,5 33.1,1,6 36.0,1,7 28.3,1,8
where the columns are comma-separated, the first row is commented out with “#” but contains the header, and all other rows contain data records. Further assume a pedigree in a file called "ped.csv" with content:
1,0,0 2,0,0 3,1,0 4,0,2 5,3,4 6,0,4 7,5,4 8,5,7
and a valid lmt parameter file:
<root>
<data>
file: data.csv
</data>
<pedigrees>
pedigrees: my_ped
<my_ped>
file: ped.csv
</my_ped>
</pedigrees>
<vars>
<res>
<sigma>
<matrix attributes="matrix">
5.0
</matrix>
</sigma>
</res>
vars: my_var
<my_var>
<sigma>
file: sigma.csv
</sigma>
<gamma>
<A>
pedigree: my_ped
</A>
</gamma>
</my_var>
</vars>
<model>
<eqn attributes="strings">
y = mu*b + id*u(v(my_var(1)))
</eqn>
</model>
</root>Compared with the parameter file in example #Estimating a mean the one above contains only a few extra elements. One this the automatic-optional <pedigrees> nested inside tag <root> . This tag contains a keystring pedigrees: myped , where the user-defined variable behind pedigrees: is the name of a nominated-compulsory tag nested inside tag {cc|<pedigrees>}}. This concept allows to supply several pedigrees to lmt (e.g. a normal pedigree and a genetic group pedigree). In our example we have only one pedigree named my_ped, with tag <my_ped> containing the information about this pedigree. Another additional element is the key string vars: my_var nested in tag <vars> where the variable of key string vars: my_var provides the tag names of nominated-compulsory tags, in this example tag <my_var> .
Tag <myvar> consist of two structural components: the automatic-compulsory tag <sigma> and the automatic-optional <gamma> . Since the the variance of $$u=A\sigma_a^2$$, where $$A=\Gamma$$ and $$\sigma_a^2=\Sigma$$, a <gamma> tag must be supplied to fully specify the variance. Note that if the <gamma> tag is missing or miss-spelled lmt will assume that the variance of $$u=I\sigma_a^2$$. Tag <gamma> contains a automatic-compulsory tag <A> which specifies the $$\Gamma=A$$. Since $$A$$ is build from a pedigree, tag <A> contains a compulsory key string pedigree: my_ped which nominates pedigree in tag <my_ped> to be used for building $$A$$.
Note the difference between the tags <sigma> nested in tag <res> and <my_var> . The former specifies <sigma> to be provided by tag <matrix attributes="matrix"> , whereas the latter specifies <sigma> to be provided by a file.
The model section in the above parameter file need to communicate to to lmt that $$u$$ is a random factor with a variance $$A\sigma_a^2$$. This is done by extending the u.d. factor name u in y = mu*b + id*u(v(my_var(1))) by a specifier (v(my_var(1))) . Note that without a specifier u would be regarded as a fixed factor. The specifier u(v) communicates that u has a variance assigned. Further, v has a specifier assigned via v(my_var) which communicates that the name of the variance is my_var . The variance in tag <my_var> contains a <gamma> and a <sigma> component. The integer number inside bracket my_var(1) communicates that $$\sigma_a^2$$ of u is located in the first diagonal element of $$\Sigma$$.
In summary construct u(v(my_var(1))) communicates that
- u has a variance assigned
- the variance is named my_var
- the variance is located in the first diagonal element of the $$\Sigma$$ matrix specified in tag <sigma> nested in tag <my_var>>
Estimating fixed means and a random genetic effects in a multi-variate model
Consider the linear model
$$ \left( \begin{array}{c} y_1 \\ y_2 \end{array} \right)= \left( \begin{array}{cc} X_1 & 0 \\ 0 & X_2 \\ \end{array} \right) \left( \begin{array}{c} b_1 \\ b_2 \end{array} \right) + \left( \begin{array}{cc} Z & 0 \\ 0 & Z \end{array} \right) \left( \begin{array}{c} u_1 \\ u_2 \end{array} \right) + \left( \begin{array}{cc} I & 0 \\ 0 & I \end{array} \right) \left( \begin{array}{c} e_1 \\ e_2 \end{array} \right) $$
where all variables are those declared in above, and subscripts $$1$$ and $$2$$ index trait $$1$$ and $$2$$, respectively.
Note that $$[u_1,u_2]\sim N([0,0],A\otimes \Sigma_a)$$ where $$A$$ is the pedigree-derived relationship matrix and $$ \Sigma_a= \left(\begin{array}{cc} \sigma_{a_1}^2 & \sigma_{a_1,a_2}\\ \sigma_{a_2,a_1} & \sigma_{a_2}^2 \end{array}\right) $$ Further, $$[e_1,e_2]\sim N([0,0],I\otimes \Sigma_e)$$ with $$ \Sigma_e= \left(\begin{array}{cc} \sigma_{e_1}^2 & \sigma_{e_1,e_2}\\ \sigma_{e_2,e_1} & \sigma_{e_2}^2 \end{array}\right) $$.
A possible data file for such mode may look like:
#y1,y2,mu,id 25.0,0.8,1,5 33.1,0.5,1,6 36.0,1.5,1,7 28.3,3.6,1,8
and the pedigree files is that provided in example #Estimating a mean and a random genetic effect in a uni-variate model.
and a valid lmt parameter file:
<root>
<data>
file: data.csv
</data>
<pedigrees>
pedigrees: my_ped
<my_ped>
file: ped.csv
</my_ped>
</pedigrees>
<vars>
<res>
<sigma>
<matrix attributes="matrix">
5.0,0.8
0.8,1.2
</matrix>
</sigma>
</res>
vars: my_var
<my_var>
<sigma>
file: sigma.csv
</sigma>
<gamma>
<A>
pedigree: my_ped
</A>
</gamma>
</my_var>
</vars>
<model>
<eqn attributes="strings">
y1 = mu*b1 + id*u1(v(my_var(1)))
y2 = mu*b2 + id*u2(v(my_var(2)))
</eqn>
</model>
</root>Example code chunks
The following code chunks are only subset of a full parameter file. It is assumed that all other parts of the instruction file are functional and all necessary input data are available and the that the data file columns have the respective names.
Providing pedigrees
Providing a pedigree containing genetic groups
<root>
...
<pedigrees>
pedigrees: a
<a>
phantomparents: 2
...
</a>
</pedigrees>
...
</root>Providing a pedigree containing metafounders
<root>
...
<pedigrees>
pedigrees: a
<a>
metafile: mymeta.csv
...
</a>
</pedigrees>
...
</root>Providing a probabilistic pedigree
<root>
...
<pedigrees>
pedigrees: a
<a>
switch: probabilistic
...
</a>
</pedigrees>
...
</root>Providing several pedigrees
<root>
...
<pedigrees>
pedigrees: a,b
<a>
...
</a>
<b>
...
</b>
</pedigrees>
...
</root>Providing Genotypes
Providing external allele frequencies
<root>
...
<genotypes>
genotypes: a,b
<a>
pqfile: mypq.csv <!-- file must contain a column vector of 2p -->
</a>
</genotypes>
...
</root>Providing several genotype files
<root>
...
<genotypes>
genotypes: a,b
<a>
...
</a>
<b>
...
</b>
</genotypes>
...
</root>Providing GRMs
Constructing GRM from genotypes
<root>
...
<genotypes>
genotypes: a
<a>
...
</a>
</genotypes>
<grms>
grms: x
<x>
genotype: a
...
</x>
</grms>
...
</root>Overriding the default GRM construction method
<root>
...
<genotypes>
genotypes: a
<a>
...
</a>
</genotypes>
<grms>
grms: x
<x>
genotype: a
method: YA <!-- method is now "Yang"("VanRaden2") -->
...
</x>
</grms>
...
</root>Constructing a GRM from file
<root>
...
<grms>
grms: x
<x>
file: mygrm.csv
...
</x>
</grms>
...
</root>
Constructing several GRMs
<root>
...
<genotypes>
genotypes: a,b
<a>
...
</a>
<b>
...
</b>
</genotypes>
<grms>
grms: x,y
<x>
genotype: a
...
</x>
<y>
genotype: b
...
</y>
</grms>
...
</root>Single step models
ssGBLUP model with GRM build from genotypes
<root>
<pedigrees>
pedigrees: a
<a>
...
</a>
<pedigrees>
<genotypes>
genotypes: a
<a>
...
pedigree: a
</a>
</genotypes>
<grms>
grms: x
<x>
genotype: a
...
</x>
</grms>
<vars>
...
vars: g
<g>
...
<gamma>
<H>
...
grm: x
pedigree: a
aweight: 0.05
</H>
</gamma>
</g>
</vars>
...
<models>
<eqn attributes="strings">
y1=mu*b1+id*u1(v(g(1))
y2=mu*b2+id*u1(v(g(2))
</eqn>
</models>
...
</root>ssGBLUP model with GRM supplied externally
<root>
<pedigrees>
pedigrees: a
<a>
...
</a>
<pedigrees>
<grms>
grms: x
<x>
file: mygrm.bin
pedigree: a
cross: id.csv
</x>
</grms>
<vars>
...
vars: g
<g>
...
<gamma>
<H>
...
grm: x
pedigree: a
aweight: 0.05
</H>
</gamma>
</g>
</vars>
...
<models>
<eqn attributes="strings">
y1=mu*b1+id*u1(v(g(1))
y2=mu*b2+id*u1(v(g(2))
</eqn>
</models>
...
</root>ssGTBLUP model
<root>
<pedigrees>
pedigrees: a
<a>
file: pedigree.csv
...
</a>
<pedigrees>
<genotypes>
genotypes: a
<a>
file: mygeno.txt
pedigree: a
cross: ids.csv
...
</a>
</genotypes>
<vars>
...
vars: g
<g>
...
<gamma>
<H>
...
type: tblup
genotype: a
pedigree: a
aweight: 0.05
</H>
</gamma>
</g>
</vars>
...
<models>
<eqn attributes="strings">
y1=mu*b1+id*u1(v(g(1))
y2=mu*b2+id*u1(v(g(2))
</eqn>
</models>
...
</root>ssSNPBLUP model
<root>
<pedigrees>
pedigrees: a
<a>
...
</a>
<pedigrees>
<genotypes>
genotypes: a
<a>
...
pedigree: a
</a>
<vars>
...
vars: g
<g>
type: snpblup1
genotype: a
aweight: 0.05
switch: adjustg2a
<sigma>
file: covG.csv
</sigma>
<marker_sb1>
<sigma>
file: covG.csv
</sigma>
</marker_sb1>
</g>
</vars>
...
<models>
<eqn>
y1=mu*b1+individual*u1(v(g(1))+dam*m1(v(g(2))
y2=mu*b2+individual*u2(v(g(3))+dam*m2(v(g(4))
</eqn>
</models>
</root>ssSNPBLUP model with meta-founders
<root>
<pedigrees>
pedigrees: a
<a>
metafile: mymeta.csv <!-- contains an nxn meta-founder co-variance matrix -->
</a>
<pedigrees>
<genotypes>
genotypes: a
<a>
...
pedigree: a
pqfile: myp.csv <!-- contains a column vector of 1 which implies p=0.5-->
</a>
<vars>
...
vars: g
<g>
type: snpblup1
genotype: a
aweight: 0.05
<sigma>
file: covG.csv
</sigma>
<marker_sb1>
<sigma>
file: covG.csv
</sigma>
</marker_sb1>
</g>
</vars>
...
<models>
<eqn>
y1=mu*b1+individual*u1(v(g(1))+dam*m1(v(g(2))
y2=mu*b2+individual*u2(v(g(3))+dam*m2(v(g(4))
</eqn>
</models>
</root>ssSNPBLUP model with a separate polygenic factor
<root>
<pedigrees>
pedigrees: a
<a>
...
</a>
<pedigrees>
<genotypes>
genotypes: a
<a>
...
pedigree: a
</a>
<vars>
...
vars: a,g
<a>
<sigma>
file: cov_polygenic.csv
</sigma>
<gamma>
<A>
pedigree: a
</A>
</gamma>
</a>
<g>
type: snpblup1
genotype: a
aweight: 0.001
switch: adjustg2a
<sigma>
file: cov_genomic.csv
</sigma>
<marker_sb1>
<sigma>
file: cov_genomic.csv
</sigma>
</marker_sb1>
</g>
</vars>
...
<models>
<eqn>
y1=mu*b1+individual*ug1(v(g(1))+dam*mg1(v(g(2))+individual*ua1(v(a(1))+dam*ma1(v(a(2))
y2=mu*b2+individual*ug2(v(g(3))+dam*mg2(v(g(4))+individual*ua2(v(a(3))+dam*ma2(v(a(4))
</eqn>
</models>
</root>ssGBLUP with two genomic factors
<root>
<pedigrees>
pedigrees: a
<a>
...
</a>
<pedigrees>
<genotypes>
genotypes: a,b
<a>
...
pedigree: a
</a>
<b>
...
pedigree: a
</b>
</genotypes>
<grms>
grms: x,y
<x>
genotype: a
...
</x>
<y>
genotype: b
...
</y>
</grms>
<vars>
...
vars: g1,g2
<g1>
...
<gamma>
<H>
...
grm: x
</H>
</gamma>
</g1>
<g2>
...
<gamma>
<H>
...
grm: y
</H>
</gamma>
</g2>
</vars>
...
<models>
<eqn attributes="strings">
y1=mu*b1+id*u11(v(g1(1))+id*u21(v(g2(1))
y2=mu*b2+id*u12(v(g1(2))+id*u22(v(g2(2))
</eqn>
</models>
</root>Regression on continuous co-variables
Linear regression
<root>
...
<models>
<eqn attributes="strings">
y1=mu*b1+age(t(co))*age1
y2=mu*b2+age(t(co))*age2
</eqn>
</models>
...
</root>User-defined polynomial expansion
<root>
...
<models>
<eqn attributes="strings">
y1=mu*b1+age(t(co(p(1,2))))*age1
y2=mu*b2+age(t(co(p(1,2))))*age2
</eqn>
<eqn attributes="strings">
x^1
log(sqrt(x))
</eqn>
</models>
...
</root>Using hard-coded Legendre polynomials
<root>
...
<models>
<eqn attributes="strings">
y1=mu*b1+age(t(co(p(1,2,3))))*age1
y2=mu*b2+age(t(co(p(1,2))))*age2
</eqn>
<eqn attributes="strings">
l0
l1
l2
</eqn>
</models>
...
</root>Nested co-variables
<root>
...
<models>
<eqn attributes="strings">
weaningweight=mu*b1+age(t(co(p(1,2),n(sex))))*age
intramuscularfatcontent=mu*b2+weight(t(co(p(1,2),n(sex))))*weight
</eqn>
<eqn attributes="strings">
x^1
x^2
</eqn>
</models>
...
</root>
Random-regression models
Nested continuous random co-variables
days is a co-variable which is nested within individual or dam .
<root>
...
<models>
<eqn attributes="strings">
y1=mu*b1+days(t(co(n(individual))))*u1(v(g(1))+days(t(co(n(dam))))*m1(v(g(2))
y2=mu*b2+days(t(co(n(individual))))*u2(v(g(3))+days(t(co(n(dam))))*m2(v(g(4))
</eqn>
</models>
...
</root>Nested continuous random co-variables with polynomial expansion
Similar to Nested continuous co-variables but days is expanded
<root>
...
<models>
<eqn attributes="strings">
y1=mu*b1+days(t(co(p(1,2,3);n(individual))))*u1(v(g(1,2,3))+days(t(co(p(1,2,3);n(dam))))*m1(v(g(4,5,6))
y2=mu*b2+days(t(co(p(1,2,3);n(individual))))*u2(v(g(7,8,9))+days(t(co(p(1,2,3);n(dam))))*m2(v(g(10,11,12))
</eqn>
<poly attributes="strings">
<! Legendre polynomials order 0, 1 and 2>
l0
l1
l2
</poly>
</models>
...
</root>Nested continuous co-variables with polynomial expansion and an integer co-variable
Similar to Nested continuous co-variables with polynomial expansion, but an additional information t(i) is provided telling lmt that days is actually an integer. While the results do not differ from Nested continuous co-variables with polynomial expansion lmt can exploit this information for memory efficiency.
<root>
...
<models>
<eqn attributes="strings">
y1=mu*b1+days(t(co(t(i);p(1,2,3);n(individual))))*u1(v(g(1,2,3))+days(t(co(t(i);p(1,2,3);n(dam))))*m1(v(g(7,8,9))
y2=mu*b2+days(t(co(t(i);p(1,2,3);n(individual))))*u2(v(g(4,5,6))+days(t(co(t(i);p(1,2,3);n(dam))))*m2(v(g(10,11,12))
</eqn>
<poly attributes="strings">
<! Legendre polynomials of order 0, 1 and 2>
l0
l1
l2
</poly>
</models>
</root>Defining equivalent models with genetic groups
Note that in the parameterization provided below absorbed genetic groups and genetic groups as extra factor must yield the same results. However, only when using absorbed genetic groups the factor level solutions are the actual breeding values. When modelling genetic groups as an extra factor genetic factor solutions and genetic group factor solutions must be added by the user.
Defining a model with absorbed genetic groups
Note that the only information necessary is the number of phantom parents at the top of the pedigree( phantomparents: 10 ) and the information to the variance that the it should be constructed allowing for genetic groups( switch gg ).
<root>
<pedigrees>
pedigrees: a
<a>
file: myped.csv
phantomparents: 10
</a>
<pedigrees>
<vars>
...
vars: g
<g>
<sigma>
file: myG.csv <! must contain a 4x4 matrix>
</sigma>
<gamma>
<A>
pedigree: a
switch: gg
</A>
</gamma>
</g>
</vars>
<models>
<eqn attributes="strings">
y1=mu*b1+id*id1(v(g(1))+dam*dam1(v(g(3))
y2=mu*b2+id*id2(v(g(2))+dam*dam2(v(g(4))
</eqn>
</models>
...
</root>Defining a model with genetic groups as extra random factor
Genetic groups are defined as an extra factor, which requires an extra variance( gg ) and two pedigrees, the genetic group pedigree( a ) and the normal pedigree( b ). For a model equivalent to absorption pedigree b must be a subset of pedigree a . Further, if breeding values are required lmt can provide the genetic group regression matrix qfile: Q.coocsv .
<root>
<pedigrees>
pedigrees: a,b
<a>
file: ggped.csv
phantomparents: 10
qfile: Q.coocsv
</a>
<b>
file: ped.csv
</b>
<pedigrees>
<vars>
...
vars: g,gg
<g>
<sigma>
file: myG.csv <! must contain a 4x4 matrix>
</sigma>
<gamma>
<A>
pedigree: b
</A>
</gamma>
</g>
<gg>
<sigma>
file: myG.csv <! must contain a 4x4 matrix. should be the same as for "g">
</sigma>
</gg>
</vars>
...
<models>
<eqn attributes="strings">
y1=mu*b1+id*id1(v(g(1))+dam*dam1(v(g(3))+id(t(gg(a)))*idgg1(v(gg(1))+dam(t(gg(a)))*damgg1(v(gg(3))
y2=mu*b2+id*id2(v(g(2))+dam*dam2(v(g(4))+id(t(gg(a)))*idgg2(v(gg(2))+dam(t(gg(a)))*damgg2(v(gg(4))
</eqn>
</models>
</root>Defining a model with fixed genetic groups
Fixed genetic groups are only supported if modeled as an extra factor. Therefore, the model is similar to above, but the extra variance is omitted. Note that when modeling genetic groups as fixed it is the users responsibility to omit one group from the respective pedigree to ensure that $$X$$ is of full column rank. [[#Linear models in lmt:Column rank of $$X$$|bla]]
<root>
<pedigrees>
pedigrees: a,b
<a>
file: ggped.csv
phantomparents: 10
qfile: Q.coocsv
</a>
<b>
file: ped.csv
</b>
<pedigrees>
<vars>
...
vars: g
<g>
<sigma>
file: myG.csv <! must contain a 4x4 matrix>
</sigma>
<gamma>
<A>
pedigree: b
</A>
</gamma>
</g>
</vars>
...
<models>
<eqn attributes="strings">
y1=mu*b1+id*id1(v(g(1))+dam*dam1(v(g(3))+id(t(gg(a)))*idgg1+dam(t(gg(a)))*damgg1
y2=mu*b2+id*id2(v(g(2))+dam*dam2(v(g(4))+id(t(gg(a)))*idgg2+dam(t(gg(a)))*damgg2
</eqn>
</models>
</root>Override the default job parameters
<root>
...
<jobs>
jobs: default
<default>
conv: -9.21 <! log(10e-5)>
</default>
</jobs>
...
</root>Use job "solve" instead of "default"
<root>
...
<jobs>
jobs: solve
<solve>
solver: x
</solve>
</jobs>
<solvers>
solvers: x
<x>
</x>
</solvers>
...
</root>Use a direct solver in stead of the default solver
<root>
...
<jobs>
jobs: solve
<solve>
solver: x
</solve>
</jobs>
<solvers>
solvers: x
<x>
<direct>
</direct>
</x>
</solvers>
...
</root>Estimating variance components using Gibbs sampling
<root>
...
<jobs>
jobs: sample
<sample>
sampler: x
</sample>
</jobs>
<samplers>
samplers: x
<x>
<blocked>
samples: 100000
</blocked>
</x>
</samplers>
...
</root>